Danh Mục Sản Phẩm

Bộ điều khiển động cơ không chổi than MBEK MINAS-BL KV Series Panasonic

Mã Sản Phẩm
: MBEK-KV
Tên Sản Phẩm
: Bộ điều khiển động cơ không chổi than MBEK MINAS-BL KV Series Panasonic
Danh Mục
: Servo Motor
Thương Hiệu
: Bộ Điều Khiển-Động Cơ Panasonic
Giá

: Liên Hệ



Bộ điều khiển động cơ không chổi than MBEK MINAS-BL KV Series Panasonic

Chi Tiết Sản Phẩm


Bộ điều khiển động cơ không chổi than MBEK MINAS-BL KV Series Panasonic

  • Loại sản phẩm: Bộ điều khiển tốc độ động cơ không chổi than MBEG MINAS-BL KV Series Panasonic
  • Mã sản phẩm:
    • MBEK5A1BCVC, MBEK5A1BDVC, MBEK5A3BCVC, MBEK5A3BDVC, MBEK5A5BCVC, MBEK5A5BDVC: 50W
    • MBEK011BCVC, MBEK011BDVC, MBEK013BCVC, MBEK013BDVC, MBEK015BCVC, MBEK015BDVC: 100W
    • MBEK021BCVC, MBEK021BDVC, MBEK023BCVC, MBEK023BDVC, MBEK025BCVC, MBEK025BDVC: 200W
    • MBEK041BCVC, MBEK041BDVC, MBEK043BCVC, MBEK043BDVC, MBEK045BCVC, MBEK045BDVC: 400W
    • MBEK081BCVC, MBEK081BDVC, MBEK083BCVC, MBEK083BDVC, MBEK085BCVC, MBEK085BDVC: 750W
  • Công suất: 50W ~750W
  • Bộ điều khiển tốc độ Động cơ không chổi than kết hợp với động cơ MBMS: MINAS-BL KV Series Panasonic MBMS
  • Download Catalogue MINAS-BL GV-KV-GP Series

Thông số kỹ thuật:

Item Specifications
Amplifier model  No. MBEK5A1BCV MBEK5A5BCV MBEK011BCV MBEK015BCV MBEK021BCV MBEK025BCV MBEK045BCV MBEK083BCV
Applicable Motor *1 MBMS5AZBL○ MBMS011BL○ MBMS012BL○ MBMS021BL○ MBMS022BL○ MBMS042BL○ MBMS082BL○
Motor rated output (W) 50 100 200 400 750
Input power  supply voltage
(V)
Single phase
100 to 120
Single phase 3-phase Single phase
100 to 120
Single phase 3-phase Single phase
100 to 120
Single phase 3-phase Single 3-phase 3-phase
200 to 240 200 to 240 200 to 240 200 to 240
Frequency (Hz) 50/60
Rated input current (A) 1.8 0.9 0.5 2.4 1.3 0.7 4.2 2.1 1.2 3.8 2.1 4
Voltage tolerance ±10 %
Control method Speed control by CS signal,  PWM sine wave driving system
Ambient temperature 0 ℃ to +50 ℃ (free from freezing)
* Ambient temperature is measured at a distance of 5 cm from the amplifier.
Ambient humidity 20 % to 85 % RH (free from condensation)
Location Indoor (No corrosive gas, A place  without garbage, and dust)
Altitude Lower than  1000 m
Vibration 5.9 m/s2  or less   (10 Hz to 60 Hz)
Protection structure/ Cooling system Equivalent to IP20/ Self cooling
Storage temperature Normal temperature
* Temperature which is acceptable  for a short time, such as during transportation is –20 ℃  to 60 ℃  (free from freezing)
Storage humidity Normal humidity
Rated rotation speed 3000 r/min
Speed control range 100 r/min to 4000 r/min
Speed fluctuation factor With load ±0.5 % or below (at 0 to Rated torque, Rated rotation speed)
With voltage ±0.5 % or below (at supply voltage  ±10 %, rated  rotation speed)
With temperature ±0.5 % or below (at 0 °C to 50 °C, rated  rotation speed)
Acceleration/ Deceleration time 0.01 sec  to 300 sec  (time for changing 1000 r/min)*2
Stopping procedure Slowdown  stop/ Free-run stop*2
Speed setting 0 r/min to 4000 r/min (analogue voltage  (0 V to 5 V), console A),
0 r/min to 4000 r/min (Setting  selection by parameter on Digital key pad)
Speed setting  resolution Analog: approx. 1/200 of upper  speed limit     Digital: 1 r/min
Speed setting  precision
(at 20 °C)
Analogue: ±3 % or below of upper  speed limit (±90 r/min or below at upper  speed limit 3000 r/min) [Digital: 1 % or below of upper  speed limit ]
Operation mode 8 speed
Signal input *2
Signal output *2
Communication function RS485 Max 31 units.    Setting  of parameter, monitoring  of control condition. Communication speed: Choose from 2400 bps/ 4800 bps/ 9600 bps
RS232 Setting  of parameter and monitoring  of control condition  are enabled with commercial PC.*3
Digital key pad Setting  of parameter, monitoring  of control condition.*4
Protective function Warning  : Undervoltage*2, Overload warning,  setting  change warning
Protect  : Undervoltage*2, Overload, Overcurrent, Overvoltage, Overheat, Overspeed, Sensor error, RS485 communication error, External  forced trip error, User parameter error,  CPU error
Regenerating brake Regenerative braking resistor can  be externally  connected.*5
Instantaneous braking torque  200 %, Continuous regenerative ability of external  regenerative resistor:  10 W
(Regenerative  operation with which motor shaft is rotated by load, e.g. load lowering operation, should not be continued.)
Protection level Protection level: torque  command 115 (inverse time characteristics)
Amplifier mass (kg) 0.37 (50 W, 100 W) / 1.0 (200 W to 750 W)

 


Tin Mới

Sản Phẩm Nổi Bật