MR-J2S-CP Bộ điều khiển Servo Driver Mitsubishi, Hỗ trợ Positioning, 1/3 Pha 220 VAC

Mã Sản Phẩm: : MR-J2S-CP
Tên Sản Phẩm: : MR-J2S-CP Bộ điều khiển Servo Driver Mitsubishi, Hỗ trợ Positioning, 1/3 Pha 220 VAC
Danh Mục: : Servo Driver
Thương Hiệu: : Servo Driver MR-J2S
Giá: : Liên Hệ

Chi Tiết Sản Phẩm

MR-J2S-CP Bộ điều khiển Servo Driver Mitsubishi, Hỗ trợ Positioning, 1/3 Pha 220 VAC

Bộ điều khiển động cơ Servo Mitsubishi 1 trục dòng MR-J2S-CP/CP1
Model:
- MR-J2S-10CP Bộ điều khiển Servo Driver Mitsubishi, Hỗ trợ Positioning, 3 Pha 220 VAC hoặc 1 Phan 220 VAC
- MR-J2S-20CP Bộ điều khiển Servo Driver Mitsubishi, Hỗ trợ Positioning, 3 Pha 220 VAC hoặc 1 Phan 220 VAC
- MR-J2S-40CP Bộ điều khiển Servo Driver Mitsubishi, Hỗ trợ Positioning, 3 Pha 220 VAC hoặc 1 Phan 220 VAC
- MR-J2S-60CP Bộ điều khiển Servo Driver Mitsubishi, Hỗ trợ Positioning, 3 Pha 220 VAC hoặc 1 Phan 220 VAC
- MR-J2S-70CP Bộ điều khiển Servo Driver Mitsubishi, Hỗ trợ Positioning, 3 Pha 220 VAC hoặc 1 Phan 220 VAC
- MR-J2S-70CP-UM Bộ điều khiển Servo Driver Mitsubishi, Hỗ trợ Positioning, 3 Pha 220 VAC hoặc 1 Phan 220 VAC
- MR-J2S-100CP Bộ điều khiển Servo Driver Mitsubishi, Hỗ trợ Positioning, 3 Pha 220 VAC
- MR-J2S-200CP Bộ điều khiển Servo Driver Mitsubishi, Hỗ trợ Positioning, 3 Pha 220 VAC
- MR-J2S-350CP Bộ điều khiển Servo Driver Mitsubishi, Hỗ trợ Positioning, 3 Pha 220 VAC
- MR-J2S-500CP Bộ điều khiển Servo Driver Mitsubishi, Hỗ trợ Positioning, 3 Pha 220 VAC
- MR-J2S-700CP Bộ điều khiển Servo Driver Mitsubishi, Hỗ trợ Positioning, 3 Pha 220 VAC
- MR-J2S-700CP-UM Bộ điều khiển Servo Driver Mitsubishi, Hỗ trợ Positioning, 3 Pha 220 VAC
- MR-J2S-10CP1 Bộ điều khiển Servo Driver Mitsubishi, Hỗ trợ Positioning, 1 Pha 110V VAC
- MR-J2S-20CP1 Bộ điều khiển Servo Driver Mitsubishi, Hỗ trợ Positioning, 1 Pha 110V VAC
- MR-J2S-40CP1 Bộ điều khiển Servo Driver Mitsubishi, Hỗ trợ Positioning, 1 Pha 110V VAC
Điện áp hoạt động:
- 3 pha 220VAC hoặc 1 pha 220VAC
Công suất:
Tích hợp sẵn điều khiển vị trí Positionning
Phần mềm cấu hình: MR Configurator-MRZJW3-SETUP161E

Thông số kỹ thuật Bộ điều khiển động cơ Servo MR-J2S-A Servo Driver Amplifier, điều khiển 1 trục:

Servo amplifier model MR-J2S-

10CP

20CP

40CP

60CP

70CP
(-UM)

100CP

200CP

350CP

500CP

700CP

10CP1

20CP1

40CP1

Power supply

Voltage/frequency (Note 1)

3-phase 200 to 230VAC 50/60Hz or
1-phase 230VAC 50/60Hz (Note 2)

3-phase 200 to 230VAC 50/60Hz (Note 2)

1-phase 100 to 120VAC
50/60Hz (Note 2)

Permissible voltage fluctuation

3-phase 200 to 230VAC: 170 to 253VAC
1-phase 230VAC: 207 to 253VAC

3-phase 170 to 253VAC

1-phase 85 to 127VAC

Permissible frequency fluctuation

±5% maximum

Control system

Sine-wave PWM control/current control system

Dynamic brake

Built-in (Note 3)

Safety features

Overcurrent shutdown, regeneration overvoltage shutdown, overload shutdown (electronic thermal), servo motor overheat protection, encoder fault protection, regeneration fault protection, undervoltage/sudden power outage protection, overspeed protection, excess error protection

Command method

Input point table number

Operating specification

Positions according to the specification of the point table No. (31 points)

Input positioning command

Set in point table. Feed length for 1 point settable between ±1µm and ±999.999mm.

Input speed command

Set in point table. Acceleration/deceleration time constant is set in point table. S-pattern acceleration/deceleration time constant is set by parameter 14.

System

Signed absolute value command system, increment value command system, signed absolute value command/incremental value command specification system.

Input position data

Operating specification

Positioning by RS-422 (RS-232C) communication data.

Input positioning command

Setting by RS-422 (RS-232C) communication.
Feed length for 1 point settable between ±1µm and ±999.999mm.

Input speed command

Setting by RS-422 (RS-232C) communication. Acceleration/deceleration time constant also set by RS-422 (RS-232C) communication. S-pattern acceleration/deceleration time constant is set by parameter 14.

System

Signed absolute value command system, increment value command system, signed absolute value command/incremental value command specification system.

Operating mode

Automatic operation mode

Point table

Point table number input and position data input system.
Each positioning operation based on position and speed commands.

Automatic continuous operation

Speed changing operation (2 to 31 speeds), automatic continuous positioning operation (2 to 31 points)

Manual operation mode

JOG

Inches upon contact input or RS-422 (RS-232C) communication based on speed commands set by a parameter.

Manual pulse generator

Manual feed by manual pulse generator.
Command pulse ratio: Selectable ✕1, ✕10, or ✕100 by the parameter.

Manual home position return mode

Dog system

Returns to home position upon Z phase pulse count after passing through near-point dog.
Direction for return to home position selectable. Home position shift amount and home position address selectable.
Automatic retreat on dog back to home position and automatic stroke retreat function.

Count system

Returns to home position upon encoder pulse count after touching near-point dog.
Direction for return to home position selectable. Home position shift amount and home position address selectable.
Automatic retreat on dog back to home position and automatic stroke retreat function.

Data set system

Returns to home position without dog. Set any position as the home position using manual operation or the like.
Settable home position address.

Stopper system

Returns to home position upon hitting end of stroke.
Direction for return to home position selectable. Home position address settable.

Ignore home (Servo-on position as home position)

Uses position where the servo on signal (SON) becomes ON as home position. Settable home position address.

Dog system rear end reference

Returns to home position with respect to the rear end of a near-point dog.
Direction for return to home position selectable. Home position shift amount and home position address selectable.
Automatic retreat on dog back to home position and automatic stroke retreat function.

Count system front end reference

Returns to home position with respect to the front end of a near-point dog.
Direction for return to home position selectable. Home position shift amount and home position address selectable.
Automatic retreat on dog back to home position and automatic stroke retreat function.

Dog cradle system

Returns to home position with respect to the front end of a near-point dog by the first Z-phase pulse. Direction for return to home position selectable. Home position shift amount and home position address selectable. Automatic retreat on dog back to home position and automatic stroke retreat function.

Structure

Self-cooling, open (IP00)

Fan cooling, open (IP00)

Self-cooling, open (IP00)

Environment

Ambient temperature

0 to 55°C (32 to 131°F) (non freezing), storage: –20 to 65°C (–4 to 149°F) (non freezing)

Ambient humidity

90% RH maximum (non condensing), storage: 90% RH maximum (non condensing)

Atmosphere

Indoors (no direct sunlight); no corrosive gas, inflammable gas, oil mist or dust

Elevation/vibration

1000m (3280ft) or less above sea level / 5.9m/s2 maximum

Mass (kg [lb])

0.7 (1.5)

1.1 (2.4)

1.7 (3.7)

2.0 (4.4)

4.9 (10.8)

7.2 (15.9)

0.7 (1.5)

1.1 (2.4)

Kết hợp ghép đôi Bộ điều khiển Servo MR-J2S điện áp 220 VAC 1 pha hoặc 3 pha với động cơ Servo Motor

Servo Driver Symbol		HC-KFS	HC-MFS	HC-SFS	HC-LFS	HC-RFS	HA-LFS	HC-UFS
MR-J2S-A / A1 / B / CP / CL	10	053, 13	053, 13	—	—	—	—	13
MR-J2S-A / A1 / B / CP / CL	20	23	23	—	—	—	—	23
MR-J2S-A / A1 / B / CP / CL	40	43	43	—	—	—	—	43
MR-J2S-A / A1 / B / CP / CL	60	—	—	52, 53	52	—	—	—
MR-J2S-A / A1 / B / CP / CL	70	73, 46, 410	73	—	—	—	—	72, 73
MR-J2S-A / A1 / B / CP / CL	100	—	—	81, 102, 103	102	—	—	—
MR-J2S-A / A1 / B / CP / CL	200	—	—	121, 201, 152, 202, 153, 203	152	103, 153	—	152
MR-J2S-A / A1 / B / CP / CL	350	—	—	301, 352, 353	202	203	—	202
MR-J2S-A / A1 / B / CP / CL	500	—	—	502	302	353, 503	502	352, 502
MR-J2S-A / A1 / B / CP / CL	700	—	—	702	—	—	601, 701M, 702	—
MR-J2S-A / A1 / B / CP / CL	11K	—	—	—	—	—	801, 12K1, 11K1M, 11K2	—
MR-J2S-A / A1 / B / CP / CL	15K	—	—	—	—	—	15K1, 15K1M, 15K2	—
MR-J2S-A / A1 / B / CP / CL	22K	—	—	—	—	—	20K1, 25K1, 22K1M, 22K2	—
MR-J2S-A / A1 / B / CP / CL	30K	—	—	—	—	—	30K1, 30K1M, 30K2	—
MR-J2S-A / A1 / B / CP / CL	37K	—	—	—	—	—	37K1, 37K1M, 37K2	—